| Picture |
Heading |
Updated |
 |
FFU (Fan filter unit)
Housing material: Galvanized steel / SS
Motor type: EC motor (BLDC motor) /AC motor
Motor efficiency:88%
HEPA filter: 99.99% efficiency @ 0.3 micron
Housing material:Galvanized steel
Dimension:Available in 2x4, 4x4 sizes
Everage Air velocity:0.45m/s |
2024-08-29 |
 |
PTFE HEPA / ULPA Filter
SPECIFICATIONS
Frame matrial: Aluminium alloy / Galvanized steel/SS
Media: Polytetrafluoroethylene (PTFE)
Grilles:Paint finished expanded mesh
Standard Frame thickness: 55mm,70mm
Design:Panel type
Maximum temperature:250oC
Maximum relative humidity |
2024-08-29 |
 |
Gel Sealing HEPA Filters
SPECIFICATIONS
Frame: Anodized aluminum
Type:Pleated panel
Media: Ultra fine glass fiber
Grille:Expanded metal painted (Both side)
Separator :Hot melt
Sealant: Urethane gel sealant
EN1822: H13 / H14 / U15
EST RP-CC001.3: TYPE C, TYPE D,TYPE F
Eff |
2024-08-29 |
 |
HEPA ULPA Filter
SPECIFICATIONS
Frame: Anodized aluminum
Media: Ultra fine glass fiber
Type:Pleated panel
Separator:Hot melt
Grille:Expanded metal painted (Both side)
Sealant: Polyurethane
Gasket: EPDM
EN1822: E10 / H12/ H13 / H14 / U15 / U16
IEST RP-CC001.3: TYP |
2024-08-29 |
 |
Activated Carbon Panel
These filters are usually refillable and are further characterised by their combination or high adsorption capacity and low flow rate. In the case or extremely high concentrations or gases, it is also advisable to use stainless steel. It is important that |
2024-08-29 |
 |
Activated Carbon Particle Plate Filter
Features
Activated Carbon Particle Plate Filter The fibrous activated carbon filter is made of high-quality powdered activated carbon as the adsorption material, and is made of high-molecular bonding material to attach it to the fiber matrix. It has good |
2024-08-29 |
 |
Metal Filters All Aluminum Removable Filters
INTRODUCTIONS
When it comes to primary filtration (also named as pre-filters), they are normally installed and applied in the 1st stage of filtration and capture larger particulates before reaching the HEPA filters. This is to reduce the large particles |
2024-08-29 |
 |
Activated Carbon Filter
Activated Carbon Filter there are pores between the cross-links, and carbon tissue defects will be generated during activation. Therefore, it is a porous carbon with low packing density and large specific surface area. It is also a The main component of t |
2024-08-29 |
Friends links